CN
 
 
Anti PID PID EVA film
SV-15296P&SV-15297P
Anti PID PID EVA film
• Can reduce the risk of component PID
• Good adhesion to TPE, PYE, KPE, TPT and other backplanes after aging
• Excellent weather resistance (including high temperature, high humidity, ultraviolet, etc.)
• Low shrinkage to ensure component stability during lamination
• Fast curing, improve component lamination production efficiency
• High light transmission to ensure the maximum output power of the module
Message?

sveck@sveck.com.cn

Need Help?

0519-82691636

 
Product Details Other Introductions

Technical Parameters

modelSV-15296P/SV-15297P
lengthCustomized according to customer requirements, between 150 meters and 400 meters
Width / thicknessCustomized according to customer requirements

performance

project

standard test

unit

SV-15296P

SV-15297P

Physical properties

Thickness tolerance

GB/T 6672-2001

mm

+/-0.05

Width tolerance

mm

+5/-3

density

ASTM D792

g/cm3

0.96

Tensile strength (after curing)

GB/T 13022-91

Mpa

≥16

≥16

Elongation at break (after curing)

%

550

550

Peel strength between film and glass

ASTM D903

N/cm

>60

Peel strength between adhesive film and back sheet

N/cm

>40

Thermal performance

Shrinkage

ASTM 1204

MD%/TD%

<4/<2

Degree of cross-linking

ASTM D2765

%

>75

>75

Electrical performance

Volume resistivity

GB 1410-89

Ω.cm

>1.0×1015

Optical performance

Light transmittance (after curing)

(280-380nm)

GB/T2410-2008%≥80≤20

Light transmittance (after curing)

(380nm~1100nm)

%≥91≥91
Weatherability

UV aging yellowing index

(60kWh/m2 )

ΔYI<2

Damp heat aging

(DH1000h)

ΔYI<4

 

Lamination process

Type

Lamination temperature(℃)

Vacuum time (min)

Lamination time(min)

SV-15296P/SV-15297P

142-148

5-6

10-12

Note: Adjust the lamination process according to the customer's lamination equipment and the requirements of the crosslinking degree.


Packing
▲ The inner diameter of the paper tube is 76mm, each roll is 150m / 200m / 400m, each roll is sealed with PE film, and 9 rolls / 6 rolls / 2 rolls are placed in a carton.
Store
Must be stored in a dry and cool constant temperature room
Temperature 0 ~ 30 ℃, humidity ≤60%;
The storage period of this product is 6 months from the production date
application
1. Make sure to store and use EVA film in a constant temperature and humidity room.
2. In order to avoid abnormal lamination of components due to static electricity, it is recommended to remove static electricity throughout the module.
3. The EVA film cut into sheets should be kept sealed to avoid pollution and moisture, and related facilities should be set up to avoid mosquito pollution.
4. It is recommended not to use each roll near the paper tube and the outermost circle.